Best Well Pump Repair in Alice, TX | 2026 Costs & Local Pros 🌵

Heavy spring rains can cause surface runoff to breach well caps. We strongly recommend testing your water for coliform bacteria and inspecting the sanitary seal.

The primary groundwater sources in Alice include the The Gulf Coast Aquifer system, specifically the Jasper and Evangeline units. This system consists of interbedded sands, silts, and clays. The water-bearing sands are typically fine-grained and yield moderate to large quantities of fresh to slightly brackish water. Traits include varying degrees of hardness, occasional iron and manganese, and the ever-present potential for fine sand production, especially with older wells or high pumping rates.. Drilling through the local The local soil profile in Alice and Jim Wells County is predominantly composed of the Victoria Clay Series and various sandy loams. The surface layers often consist of dark, calcareous clays over deeper horizons of clay, sandy clay, and loamy sands. These soils are characteristic of the Gulf Coastal Plain, offering good agricultural potential but can be challenging for drilling due to swelling clays and varying cohesiveness. means that average well depths range from 300 ft – 700 ft.

Due to these geological factors, local homeowners frequently struggle with Sand abrasion. The fine, unconsolidated sands of the Gulf Coast Aquifer are notorious for getting into the pump, grinding down impellers, diffusers, and even the pump housing. This leads to reduced efficiency, increased energy consumption, and eventually, total pump failure..

Pump systems in the Alice area face severe environmental stressors. The most significant threat is The scorching South Texas heat and prolonged droughts are major threats. High ambient temperatures stress pump motors and control boxes, leading to overheating and premature failure. Droughts cause water tables to drop, forcing pumps to work harder and longer, often running dry or pumping sand as water levels fall below the intake, leading to motor burnout or severe abrasion.

Additionally, the raw groundwater often presents issues with Hardness (calcium & magnesium), iron, and a significant presence of fine sand are the most common water quality issues in our wells. Sulfur (hydrogen sulfide gas) is also encountered, causing rotten egg odors. These issues necessitate proper pump selection, sometimes filtration, and often lead to scale buildup on internal pump components..

• Verify power supply, circuit breakers, and control box functionality.
• Check pump motor amperage and voltage against manufacturer specifications.
• Perform pressure tank inspection: check air pre-charge, diaphragm integrity, and tank cycling.
• Measure static water level and pumping water level (if possible without pulling pump).
• Inspect all accessible piping, fittings, and wellhead for leaks or damage.
• Test water quality for sand, iron, and hardness, especially if flow or clarity issues are reported.

Our licensed technicians in Alice are certified to repair, replace, and install high-quality groundwater equipment from industry-leading manufacturers, including:

• No water at all, or significantly reduced flow.
• Pump constantly cycling on and off, or running excessively long.
• Murky water, sand, or sediment coming from faucets.
• Increased electric bills without changes in water usage.
• Hissing or gurgling noises from the pressure tank or plumbing.
• Motor humming but pump not moving water.

Local Dispatch & Response Times

• Typically 2-4 hours for initial assessment within Alice city limits and immediate surrounding areas, depending on call volume.
• For urgent, no-water emergencies on established customer routes, we prioritize same-day service, often within 6-8 hours.
• After-hours or weekend calls will incur emergency service fees, with response aimed at restoring critical water supply as quickly as possible.
• Remote rural locations or difficult-to-access sites may add an hour or two to travel and setup time.
• Full pump replacement or major well repairs might require parts ordering, extending resolution beyond the initial response, but temporary solutions are often explored.

Local Alice
Well Pros

What are the specific groundwater regulations, average well depths, and the local conservation district for Alice, Jim Wells County?

Residential Water Well Regulations in Alice, Jim Wells County (2026)

As a Senior Hydrogeologist and Local Groundwater Regulatory Expert for Texas, I can provide you with the specific information regarding residential water wells in Alice, Jim Wells County, for the year 2026.

Local Groundwater Conservation District (GCD)

• Duval County Groundwater Conservation District (DCGCD) is the local regulatory authority for groundwater use and well permitting in Jim Wells County. While the name suggests Duval County, its jurisdiction extends to include Jim Wells County.
• The DCGCD is responsible for developing and implementing rules to conserve, preserve, protect, and recharge the groundwater resources within its boundaries. These rules cover well permitting, spacing, construction standards, and potential production limits for new and existing wells.
• You can find their official rules, permit applications, and contact information on their website: Duval County Groundwater Conservation District.

Specific Groundwater Regulations and Permitting

• DCGCD Regulations: Any new residential water well within Alice, Jim Wells County, will require a permit from the Duval County GCD before drilling commences. The DCGCD's rules typically address:
  • Permitting: Applications for new wells, requiring detailed information on the proposed well location, depth, and intended use.
  • Well Spacing: Minimum distances required between new wells and existing wells, as well as property lines, to prevent interference and ensure equitable resource distribution.
  • Well Construction Standards: Specific requirements for casing, cementing, and completion to protect water quality and prevent contamination.
  • Plugging Requirements: Regulations for properly plugging abandoned wells to protect the aquifer.
• State Regulations (Texas Water Code Chapter 36): All Groundwater Conservation Districts in Texas, including the DCGCD, operate under the authority granted by the Texas Water Code Chapter 36. This chapter provides the foundational legal framework for GCDs to manage groundwater resources.
• State Well Construction Standards (TDLR): In addition to GCD rules, all water well drilling and pump installation in Texas must comply with statewide standards enforced by the Texas Department of Licensing and Regulation (TDLR). These standards are primarily outlined in Title 16, Texas Administrative Code, Chapter 76 (Water Well Drillers and Pump Installers). This chapter details requirements for well construction, sealing, and driller licensing, ensuring public health and safety, and aquifer protection.
  • You must use a licensed water well driller for any new well construction. You can verify driller licenses and find comprehensive information on well construction standards via the TDLR website: TDLR Water Well Drillers and Pump Installers.

Average Well Depths in Alice, Jim Wells County

• Based on historical state well logs and typical residential water demands in the region, the average well depth for residential water wells in Alice, Jim Wells County, targeting reliable groundwater, is approximately 225 feet.
• Actual depths can vary depending on the specific property location, local hydrogeology, and the desired quantity and quality of water. However, 225 feet represents a solid average for planning purposes in this area.

Specific Aquifer Beneath Alice

• The primary aquifer system underlying Alice, Jim Wells County, is the Gulf Coast Aquifer System. For most residential wells in this area, the water is primarily drawn from the shallower units of this extensive system, specifically the Chicot Aquifer and, to a lesser extent, the upper portions of the Evangeline Aquifer.